AXIOMTEK MANO315 Series, User Manual

Page: 24 / 56

MANO315 Mini ITX Motherboard
18 Board and Pin Assignments
LAN2
USB 3.0
LAN1
USB 2.0
2.4.16 LAN and USB 3.0/2.0 Connectors (USB3_RJ1 and
USB2_RJ1)
The motherboard comes with two high performance plug and plays Ethernet interfaces
(in RJ-45) which are fully compliant with the IEEE 802.3 standard. Connection can be
established by plugging one end of the Ethernet cable into this RJ-45 connector and the
other end to a 1000/100/10-Base-T hub.
The USB 3.0 and USB 2.0 connectors on the rear I/O are for installing USB peripherals
such as keyboard, mouse, scanner, etc.
USB3_RJ1
Note

Speed LED turns orange for 1000Mbps or green for 100Mbps.
USB2_RJ1
Pin LAN Signal Pin LAN Signal
L1
Tx+ (Data
transmission positive)
L2
Tx- (Data transmission
negative)
L3
Rx+ (Data reception
positive)
L4
RJ-1 (For 1000 Base-T
only)
L5 RJ-1 (For 1000
Base-T only) L6 Rx- (Data reception
negative)
L7 RJ-1 (For 1000
Base-T only) L8 RJ-1 (For 1000 Base-T
only)
A Active LED B Speed LED
[*]
Pin USB 3.0 Signal Pin USB 3.0 Signal
1 USB_VCC (+5V_SBY) 10
USB_VCC
(+5V_SBY )
2 USB #0_D- 11 USB #1_D-
3 USB #0_D+ 12 USB #1_D+
4 GND 13 GND
5 SSRX0- 14 SSRX1-
6 SSRX0+ 15 SSRX1+
7 GND 16 GND
8 SSTX1- 17 SSTX2-
9 SSTX1+ 18 SSTX2+
Pin LAN Signal Pin LAN Signal
L1
Tx+ (Data
transmission positive)
L2
Tx- (Data transmission
negative)
L3
Rx+ (Data reception
positive)
L4
RJ-1 (For 1000 Base-T
only)
L5 RJ-1 (For 1000
Base-T only) L6 Rx- (Data reception
negative)
L7 RJ-1 (For 1000
Base-T only) L8 RJ-1 (For 1000 Base-T
only)
A Active LED B Speed LED
[*]