AXIOMTEK MANO310 Series, User Manual

Page: 29 / 65

MANO310 Mini ITX Motherboard
Board and Pin Assignments 23
2.4.20 LVDS Backlight Control Connector (CN28)
This is an 8-pin (pitch=1.25mm) connector which is compliant with Hirose
DF13-8P-1.25V for inverter. We strongly recommend you to use the matching connector,
DF13-8S-1.25C, to avoid malfunction. Pin 8 can be set control mode by setting JP10
(see section 2.3.6).
2.4.21 VGA Connector (CN30)
The CN30 is a high rise 15-pin D-Sub connector which is commonly used for VGA
monitor. This VGA interface configuration can be configured via software utility.
2.4.22 DC Jack Power Input Connector (CN31)
Firmly insert DC power adapter into this
connector. Loose connection may cause
system instability and make sure all
components/devices are properly installed
before connecting.
Pin Signal
1 +12V
2 +12V
3 +5V
4 LVDS_BKL_EN
5 GND
6 GND
7 GND
8 LVDS_BKL_CTL
[*]
Pin Signal Pin Signal
1 Red 2 Green
3 Blue 4 NC
5 GND 6 DETECT
7 GND 8 GND
9 VCC 10 GND
11 NC 12 DDC DATA
13 Horizontal Sync 14 Vertical Sync
15 DDC CLK