AXIOMTEK MANO310 Series, User Manual

Page: 23 / 65

MANO310 Mini ITX Motherboard
Board and Pin Assignments 17
2.4.7 DC Power Input Connector (CN10)
This is a 4-pin ATX connector for DC-IN power input. External power supply plug fits into
this connector in only one orientation. Properly press down power supply plug until it
completely and firmly fits into this connector. Loose connection may cause system
instability.
2.4.8 Power Status Connector (CN11)
This is a 2-pin (pitch=2.54mm) connector. It lets user know the power status of this
motherboard.
2.4.9 Digital I/O Connectors (CN12 and CN13)
The motherboard comes with two 2x5-pin (pitch=2.0mm) connectors for digital I/O
interfaces.
CN12
Pin Signal
1 GND
2 GND
3 +DCIN
4 +DCIN
Pin Signal
1 PWR+
2 PWR-
Pin Signal Pin Signal
1 +5V 2
SIO_GPI70
(0xA06, Bit0, L)
[*]
3
SIO_GPO74
(0xA06, Bit4, L)
[*]
4
SIO_GPI71
(0xA06, Bit1, L)
[*]
5
SIO_GPO75
(0xA06, Bit5, L)
[*]
6
SIO_GPI72
(0xA06, Bit2, L)
[*]
7
SIO_GPO76
(0xA06, Bit6, L)
[*]
8
SIO_GPI73
(0xA06, Bit3, L)
[*]
9
SIO_GPO77
(0xA06, Bit7, L)
[*]
10 GND
1
3
2
4
1