GOT817L-511 U
ser’s Manual
System Configurations
10
Table 2: Jumpter setting for JP3
Function
Setting
+5V Power
1-3 close
DCD Data:
3-5 close (Default)
+12V Power
2-4 close
RI Data:
4-6 close (Default)
Warning: According the warrantee is adopt for the IP66 guarantee, please inform the COM1
setting when ordering, also please kindly don
’t disassemble the system by
youself.
2.1.2 Ethernet
The GOT817L-511 is equipped with a high performance Plug and P lay Ethernet
interface, full compliant with IEEE 802.3 standard , and can be connected with a M12
LAN connector.
Please refer to detailed pin assignment list below:
Pin
Signal
1
TX+ (Data transmission positive
2
TX- (Data transmission negative)
3
Rx+(Data reception positive)
4
RJ45 termination
5
RJ45 termination
6
Rx- (Data reception negative)
7
RJ45 termination
8
RJ45 termination
2.1.3 USB Port
The USB is a Universal Serial Bus (compliant with USB 2.0 (480Mbps)) connector on
the rear I/O. It is commonly used for installing USB peripherals such as keyboard,
mouse, scanner, etc.
Pin
Signal
Pin
Signal
1
USB VCC (+5V level)
5
USB VCC (+5V level)
2
USB #0_D-
6
USB #1_D-
3
USB #0_D+
7
USB #1_D+
4
GND
8
GND
