ETM830 All-In-One ETX v3.01 SoM User’s Manual
Award BIOS Utility
44
reception mode.
¾
UAR2 Duplex Mode
The second serial port offers these infrared interface modes:
1. IrDA
2.
ASKIR IrDA-compliant serial infrared port
3.
Normalo (default value)
NOTE
:
The UART Mode Select will not appear on the menu
once you disable the setting of Onboard Serial Port
2.
¾
Use IR Pins
Use this item to set up IR devices based on the IR pin
definitions.
¾
Onboard Paralellel Port
This item allows you to determine the I/O address for
onboard parallel port. Options are:
“378H/IRQ7”,
“278H/IRQ5”, “3BC/IRQ7”
and
“Disabled”
.
¾
Parallel Port Mode
Select an operating mode for the onboard parallel (printer)
port. Select Normal unless your hardware and software
require another mode in this field. Options are:
“EPP1.9”,
“ECP”, “SPP”, “ECPEPP1.7”
and
“EPP1.7”
.
¾
EPP Mode Select
Select EPP port type 1.7 or 1.9.
¾
ECP Mode Use DMA
Select a DMA channel for the parallel port while using the
ECP mode.
¾
PWRON After PWR-Fail
This item enables your computer to automatically restart or
return to its operating status.
Press <Esc> to return to the Integrated Peripherals page, and press it
again to the Main Menu.
