ETM830 All-In-One ETX v3.01 SoM User’s Manual
Award BIOS Utility
33
Press <Esc> to return to the Advanced BIOS Features page.
z
CPU L1 & L2 Cache
These two options speed up memory access. However, it depends
on the CPU/chipset design. The default setting is
“
Enabled
”
.
CPUs without built-in internal cache will not provide the
“
CPU
Internal Cache
”
item on the menu.
Enabled
Enable cache
Disabled
Disable cache
z
Hyper-Threading Technology
Use this item to enable or disable Hyper-Threading Technology,
which makes a single physical processor perform multi-tasking
function as two logical ones.
z
Quick Power On Self Test
This option speeds up Power on Self Test (POST) after you turn on
the system power. If set as Enabled, BIOS will shorten or skip
some check items during POST. The default setting is
“
Enabled
”
.
Enabled
Enable Quick POST
Disabled
Normal POST
z
First/Second/Third Boot Device
These items let you select the 1st, 2nd, and 3rd devices that the
system will search for during its boot-up sequence. The wide range
of selection includes Floppy, LS120, ZIP100, HDD0~3, SCSI, and
CDROM.
z
Boot Other Device
This item allows users to enable or disable the boot device not
listed in the First/Second/Third boot devices option above. The
default setting is
“
Enabled
”
.
z
Onboard Lan Boot ROM
Use this item to enable or disable the Boot ROM function of the
onboard LAN chip when the system boots up
z
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive type, 40 or
80 tracks. The 360Kb type is 40 tracks while 720Kb, 1.2MB and
1.44MB are all 80 tracks. The default value is
“
Enabled
”
.
