AXIOMTEK EP600 Series, User Manual, Page: 56 / 76

EP600 Pentium
®
M All-in-One Capa Board User’s Manual
48
Award BIOS Utility
Ultra DMA 66/100 implementation is possible only if your IDE
hard drive supports it and the operating environment includes a
DMA driver (Windows 95 OSR2 or a third-party IDE bus master
driver). If your hard drive and your system software support Ultra
DMA 33/66/100, select Auto to enable BIOS support. The options
available are Auto, Mode 0, Mode 1, and Mode 2.
z
On-Chip Primary/Secondary PCI IDE
The integrated peripheral controller contains an IDE interface
with support for two IDE channels. Select Enabled to activate
each channel separately. The default value is
“ Enabled ”
.
NOTE:
Choosing Disabled for these options will
automatically remove the IDE Primary
Master/Slave PIO and/or IDE Secondary
Master/Slave PIO items on the menu.
z
USB Keyboard Support
Select
Enabled
if your system contains a Universal Serial Bus
(USB) controller and you have a USB keyboard.
z
Init Display First
This item allows you to decide to active whether PCI Slot or AGP
first. The options available are PCI Slot, AGP.
z
IDE HDD Block Mode
This field allows your hard disk controller to use the fast block
mode to transfer data to and from your hard disk drive.