AXIOMTEK EP600 Series, User Manual, Page: 3 / 76

iii
ESD Precautions
Integrated circuits on computer boards are sensitive to static
electricity. To avoid damaging chips from electrostatic
discharge, observe the following precautions:
„ Do not remove boards or integrated circuits from their anti-static
packaging until you are ready to install them.
„ Before handling a board or integrated circuit, touch an unpainted
portion of the system unit chassis for a few seconds. This helps to
discharge any static electricity on your body.
„ Wear a wrist-grounding strap, available from most electronic
component stores, when handling boards and components.
Trademarks Acknowledgments
AXIOMTEK is a trademark of AXIOMTEK Co., Ltd.
MS-DOS and Windows
’
95 are trademarks of Microsoft
Corporation.
AWARD is a trademark of Award Software. Inc.
IBM, PC/AT, PS/2, VGA are trademarks of International
Business Machines Corporation.
Intel and Pentium are trademarks of Intel Corporation.
Winbond is a trademark of Winbond Electronics Corp.
SMI is a trademark of Silicon Motion Inc.
Other brand names and trademarks are the properties
and registered brands of their respective owners.