AXIOMTEK eBOX671A Series, User Manual

Page: 21 / 81

eBOX671A Series u
ser’s Manual
Hardware Installation 13
SECTION 2
HARDWARE INSTALLATION
The eBOX671A is convenient for various hardware configurations, such as CPU, DRAM, HDD
(Hard Disk Drive), SSD (Solid State Drive), PCI Express Mini card modules and optional MXM
graphic module. Section 2 contains guidelines for hardware installation.
2.1 Installation of CPU
Step 1 Turn off the system and unplug the power cord.
Step 2 Loosen four screws to remove top cover.
Step 3 Remove the warning label and disengage load lever.
⚫ Disengage load lever by pushing its hook down and then pulling it slightly outward.
⚫ Rotate load lever to open position at approximately 135°.
⚫ Rotate load plate to open position at approximately 150°.
Note
Apply pressure to corner with right-hand thumb when opening or closing
load lever - otherwise lever will bounce back (as a mouse trap) causing
bent contacts.