eBOX622-830-FL Series U
ser’s Manual
Jumper Setting & Connector
35
3.2
Jumper Settings
Jumper is a small component consisting of jumper clip and jumper pins. Install jumper clip on
2 jumper pins to close. And remove jumper clip from 2 jumper pins to open. Below illustration
shows how to set up jumper.
Properly configure jumper settings on the eBOX622-830-FL to meet your application purpose.
We are herewith listing a summary table of all jumpers and default settings for onboard
devices, respectively.
Jumper
Description
Setting
JP3
Restore BIOS Optimal Defaults
Default: Normal Operation
1-2 Close
JP4
Auto Power On
Default: Disable
Close
