AXIOMTEK E38M561100, User Manual

Page: 24 / 62

MANO561 Mini ITX Motherboard
18 Board and Pin Assignments
2.4.14 VGA Connector (CN5)
The CN5 is a 2x8-pin (pitch=2.00mm) header for VGA interface.
2.4.15 eDP Connector (CN50)
This connector supports 18/24 bit single-channel panels.
Note
[*] : Panel power VDD is 3.3V by default, 5V or 12V is selectable by jumper
JP4, see section 2.3.3.
[**]
: CN50 is co-layout with LVDS signal connector (CN29); they can’t be
accessed simultaneously.
Pin Signal Pin Signal
1 VGA_RED 2 +5V
3 VGA_GRN 4 GND
5 VGA_BLUE 6 NC
7 NC 8 VGA_5VDDA
9 GND 10 HSYNC_C
11 GND 12 VSYNC_C
13 GND 14 5VDDCLK
15 GND
Pin Signal Pin Signal
1 VDD
[*]
2 VDD
[*]
3 VDD [*] 4 VDD [*]
5 NC 6 GND
7 GND 8 GND
9 GND 10 EMB_HPD
11 GND 12 EDP_TXN3C
13 EDP_TXP3_C 14 GND
15 EDP_TXN2_C 16 EDP_TXP2_C
17 GND 18 EDP_TXN1_C
19 EDP_TXP1_C 20 GND
21 EDP_TXN0_C 22 EDP_TXP0_C
23 GND 24 EMB_AUXP
25 EMB_AUXN 26 GND
27 VSS_EDP_AMOLED 28 VSS_EDP_AMOLED
29 VSS_EDP_AMOLED 30 VSS_EDP_AMOLED
31 NC 32 EDP_BKLTCTL
33 EDP_BKLTEN 34 NC
35 NC 36 VCC_EDP_BKLT
37 VCC_EDP_BKLT 38 VCC_EDP_BKLT
39 VCC_EDP_BKLT 40 NC