AXIOMTEK E38M561100, User Manual

Page: 22 / 62

MANO561 Mini ITX Motherboard
16 Board and Pin Assignments
2.4.10 Digital I/O Connector (CN26)
The CN26 is a 2x5-pin (pitch=2.00mm) connector for digital I/O interface.
You may use software programming to control these digital signals, please refer to
Appendix B.
2.4.11 LVDS Signal Connector (CN29)
The CN29 is a 2x20-pin (pitch=1.00mm) connector for LVDS panel interface
Note
[*] : Panel power VDD is 3.3V by default, 5V or 12V is selectable by jumper
JP4, see section 2.3.3.
Pin Signal
1 5V
2 DO0
3 DI0
4 DO1
5 DI1
6 DO2
7 DI2
8 DO3
9 DI3
10 GND
Pin Signal Pin Signal
1 VDD [*] 2 VDD [*]
3 VDD
[*]
4 VDD
[*]
5 VDD
[*]
6 VDD
[*]
7 LVDS_EDID_SCL 8 LVDS_EDID_SDA
9 GND 10 GND
11 LVDS_B_DATA0- 12 LVDS_B_DATA3-
13 LVDS_ 14 LVDS_
15 GND 16 GND
17 LVDS_B_DATA1- 18 LVDS_B_CLK-
19 LVDS_ 20 LVD
21 GND 22 GND
23 LVDS_B_DATA2- 24 LVDS_A_DATA0-
25 LVDS_ 26 LVDS_
27 GND 28 GND
29 LVDS_A_DATA3- 30 LVDS_A_DATA1-
31 LVDS_ 32 LVDS_
33 GND 34 GND
35 LVDS_A_CLK- 36 LVDS_A_DATA2-
37 LVD 38 LVDS_
39 GND
]
40 GND