CEM820 Intel
®
Pentium
®
M/Celeron
®
COM Express
TM
Type-II Module
Award BIOS Utility
31
Enabled
Enable Quick POST
Disabled
Normal POST
z
First/Second/Third Boot Device
These items let you select the 1
st
, 2
nd
, and 3
rd
devices that the
system will search for during its boot-up sequence. The wide range
of selection includes Floppy, LS120, ZIP100, HDD0~3, SCSI, and
CDROM.
z
Boot Other Device
This item allows the user to enable or disable the boot device not
listed in the First/Second/Third boot devices option above. The
default setting is “
Enabled”
.
z
Swap Floppy Drive
This item allows you to determine whether to enable Swap Floppy
Drive or not. When enabled, the BIOS swap floppy drive
assignment makes Drive A become Drive B, and vice versa. The
default setting is “
Disabled”.
z
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive type, 40 or
80 tracks. The 360Kb type is 40 tracks while 720Kb, 1.2MB and
1.44MB are all 80 tracks. The default value is “
Enabled
”.
Enabled
BIOS searches for floppy disk drive to determine if it is
40 or 80 tracks. Please be noted BIOS can not
differentiate 720K, 1.2M or 1.44M drive type as they all
are 80 tracks.
Disabled
BIOS will not search for the type of floppy disk drive by
track number. There will be no warning message
displayed if the installed drive is 360K.
z
Boot Up NumLock Status
Set the the Num Lock status when the system is powered on.
The default value is
“On”
.
z
Gate A20 Option
The default value is
“Fast”
.
Normal
The A20 signal is controlled by keyboard controller
or chipset hardware.
