CEB94011 COM Express
TM
Type 6 Development Baseboard
12
Board and Pin Assignments
2.4.6
Restore BIOS Optimal Defaults (JP10)
Put jumper clip to pin 2-3 for a few seconds then move it back to pin 1-2. Doing this
procedure can restore BIOS optimal defaults.
2.4.7
DIO/SD Card Function Selection (JP12)
The JP12 is for Digital I/O or SD card function selection.
2.4.8
Thermal Trip Indicator (JP13)
Use JP13 to enable or disable thermal trip LED indicator.
2.4.9
LVDS Brightness Control Mode Setting (JP14)
The JP14 enables you to select PWM or voltage control mode for inverter connector
(CN15). These two control modes are for adjusting the brightness of LVDS panel.
Function
Setting
Normal (Default)
1-2 close
Restore BIOS optimal defaults
2-3 close
Function
Setting
DIO (Default)
1-2 close
SD card
2-3 close
Function
Setting
Disable LED (Default)
1-2 close
Enable LED
2-3 close
Function
Setting
PWM mode(Default)
1-2 close
Voltage mode
2-3 close
