AXIOMTEK CAPA322, User Manual

Page: 24 / 67

CAPA322 3.5” Board
14 Board and Pin Assignment
2.4.9 eDP Connector (CN9) (Optional)
The eDP interface is available through 40-pin connector (CN9), which is compliant with
IPEX-20143. Pin 1~4 LCD_VCC can be set to +3.3V, +5V or +12V with JP1 (see section
2.3.1).
2.4.10 SIM Card Wafer Connector (CN10)
The CN10 is a 6-pin (pitch=1.0mm) wafer connector fully compliant with JST
B6B-PH-K-S. AX93A19 SIM I/O board is suggested to use for CN10 to have SIM card
slot.
In order to work properly, the SIM card must be used together with 3G/4G/LTE/5G
module in either PCI Express Mini card (SCN3) or M.2 Key B connector (SCN4).
Pin Signal Pin Signal
1 LCD_VCC 21 TXN0
2 LCD_VCC 22 TXP0
3 LCD_VCC 23 High Speed_GND
4 LCD_VCC 24 AUXP
5 NC 25 AUXN
6 LCD_GND 26 High Speed_GND
7 LCD_GND 27 BKLT_GND
8 LCD_GND 28 BKLT_GND
9 LCD_GND 29 BKLT_GND
10 HPD 30 BKLT_GND
11 High Speed_GND 31 NC
12 TXN3 32 BKLT_CTRL
13 TXP3 33 BKLT_EN
14 High Speed_GND 34 NC
15 TXN2 35 NC
16 TXP2 36 BKLT_VCC_12V
17 High Speed_GND 37 BKLT_VCC_12V
18 TXN1 38 BKLT_VCC_12V
19 TXP1 39 BKLT_VCC_12V
20 High Speed_GND 40 NC
Pin Signal
1 PWR
2 RST
3 CLK
4 I/O
5 VPP
6 GND
1
40
1
6