AX5420P & AX5425P User
’
s Manual
Device Driver
21
C h a p t e r 4
Device Driver
Device driver is suitable for plug&play in DOS environment to
get some information from PCI BIOS. This section describes in
detail on how to install the device driver and use the device
driver command to get base address, IRQ level, slot number.
Also examples of program are provided only for reference.
After getting their information successfully, you can use the
information to act as parameter for driver function described in
next chapter. All operations within this section will not work
unless the device driver 5425/5420DRV.SYS is successfully
installed.
How to Install the Device Driver
Before executing any application program (including the
following examples), the device driver below must be installed.
Is demo for AX5425P
If you own an AX5420P, please change "5425" to "5420". To
install the device driver, type:
SETUP [SOURCEDRIVE] [TARGET DRIVE] [DIRECTORY]
This will copy the device driver into your designated directory.
And then add the following command line to your config.sys:
DEVICE = [PATH] 5425DRV.SYS
Example
If you insert this diskette in drive A: and want to copy the file
into C:\AX5425P. You must key in the following command line
from the DOS prompt.
A:\> SETUP A: C: AX5425P[ENTER]
Summary of Contents for AX5420P
