AIE900-902-FL Series U
ser’s Manual
Jetpack BSP Flash Method
43
4.3
JTOP
— Third-party Jetson Platform Monitor Tool
JTOP is a third-party system monitoring utility that runs on the terminal and se e and
control realtime the status of the AIE Series Platform. CPU, RAM, GPU status, power
mode management, toolkits version and more.
Installation Guide:
Please enter the following commands in terminal to install JTOP.
$ sudo python3 -m pip install jetson-stats
Then, it can be accessed in terminal with the command :
$ sudo jtop
Note: JTOP
may require approximately 200 to 300 MB of storage space.
