AXIOMET AX-TI220, Operation Manual

Page: 3 / 12

3
Chapter 2
Characteristics
•
500 counts measurement
•
ACV and DCV measurements reach up to 1000V
•
DC measurement accuracy reaches up to 0,1%
•
0,1 Ω resistance resolution and 10µ V voltage resolution
•
Linear frequency measurement logic frequency/duty ratio measurement
•
Capacitance measurement from 0.1 nf to 1000µF
•
AC/DC true RMS measurement
•
Maximum value/minimum value measurement
•
Insulation resistance measurement range: 50K Ω to 2G Ω
•
Automatic shutdown/continuous working mode selection
•
Back light control
•
Overload protection
•
Secondary plasticizing meter shell, with insulating performance reaching 1000V CAT III
Explanation on Front Panel
The front panel is shown as in Figure 2-1, explanation being as follows:
Figure 2-1
(1)
V
Hz
end
It is the input end for all measurement functions except for current measurement and insulation
resistance measurement, connected with a red meter probe. Hereinafter referred to as V end.
(2) COM end
It is the negative input end for all measurements except for insulation resistance measurement,
connected with a black meter probe.
(3) mA/µA end
It is the positive end for measurement of mA or µA current, connected with a red meter probe.
It is an end for measurement of the insulation resistance, connected with a black meter probe.
(4) INS end
It is the input end for insulation resistance measurement, connected with a red meter probe.