2
Symbols on the instrument and in the instruction manual:
Warning! Warns of potenitial danger, comply with theiInstruction manual.
Caution! Dangerous voltage. Danger of electrical Shock.
Continuous double or reinforced insulation complies to IEC 61140, Class II
Symbol for the marking of electrical and electronic equipment (WEEE Directive
2002/96/EC). Environmental Protection. Waste electrical products should not be
disposed of with household waste. Please recycle where facilities exist. Check with your
local authority or retailer for recycling advice.
Symbol of conformity, confirms conformity with relevant EU directives. The instrument
complies with the EMC Directive (89/336/EEC), as well as the Low Voltage Directive
(73/23/EEC)
During application and removal of the CURENT SENSORS, please de-energise the
installation on which the current is measured, or to adept safe operating procedures
when working on HAZARDOUS LIVE installations.
Introduction
The digital Current Clamp is a universal current measurement clamp. The measurement instrument
has been built in compliance with the most up-to-data Directives EN 61010, IEC 61010 and ensures
safe and reliable operation.
Features
•
Small, handy AC Current Clamp up to 400A
•
Measurements also in small compact systems with very limited space, available without
interruption lines.
•
3 ¾ digit LCD, maximum 3999 digits
•
Data Hold Function
•
Min/Max Function
•
Voltage measurement AC/DC up to 600V
•
Clamp opening 28 mm
