5
When it is full of five data, OU icon will display on the LCD. If need to store more data, you should
clear all data which have been stored before (in normal mode, press the
MEM
key >2 sec.,
then a CLEAR icon will display on the LCD)
LIMIT
: To enforce Hi/Lo alarm function
When SHIFT is enabled, press the
LIMIT
key to turn the Hi/Lo alarm ON or OFF.
4.
key
Press the key, a
icon will display on the LCD and the readout held In. Press the key once more
to cancel the hold function.
Press the key >2 sec. the back light will be turned on, and the
icon will display on the LCD.
Press the key once more >2 sec. the light will be turned off, and the icon will disappeard.
5.
UNIT
The temperature unit selection.
Press the key to select alternate the two temperature units of
°
C and
°
F.
TYPE
Select thermocouple type function
When
SHIFT
is enabled, press the key to select alternate the two thermocouple type of K-type and
J-type.
6.
MODE
The maximum/minimum readout setting
Hi/Lo
The alarm Hi/Lo temperature setting.
When the main display temperature is higher than Hi temperature setting or lower than Lo
temperature setting the alarm will continue send out.
When
SHIFT
is enabled, press the Hi/Lo key to enter the Hi/Lo temperature setting:
A.
Use SHIFT key to select Hi or Lo setting.
B.
Use MODE or HOLD key to move position.
C.
Use T1-T2 or UNIT key to set temperature.
D.
Use SHIFT key to complete the setting.
