4
4. OPERATION INSTRUCTION
*
NOTE: After abrupt ambient temperature changes, allow instrument temperature to stabilize for
20 minutes before using for measurement.
1.
Put the instrument with enough battery power in the hand, press the
key to turn the
Power on and enter into the measuring mode.
2.
If the instrument is connected to the thermocouple, it will display the thermocouple temperature
of the port T1 or T2. Otherwise, it will display OL.
3.
You can Press the function key to change temperature unit, select T1-T2/MAX/MIN/HOLD mode
and K/J type, set Hi/Lo alarm, and store data (refer to “function keys”)
4.
Press the
key >2 sec. to turn the back light on or off.
5.
Press
key > 2 sec. To turn the power OFF. If you still need more operations,
please see the description of function keys.
5. FUNCTION KEYS
1.
key
ON/OFF
: Power ON/OFF key: Press the key to turn the Power ON and Press the key once
more > 2sec. to turn the power OFF.
SHIFT
second function key: Press the key to enable the second function of the key, and a SHIFT icon
will display on the LCD.
The function of key:
SHIFT
disenable:
MEM, MODE, UNIT
SHIFT
enable:
LIMIT, Hi/Lo, TYPE
2.
T1-T2 key
Press the key to enforce T1-T2 function and the T1-T2 icon will display on the LCD.
3.
MEM
function: Press the key to store the present reading of T1 and T2. Five groups of data can be
stored at most.
In the mode of MEM, press the key
T1-T2
or
UNIT
to view the recorded data up and down, and press
the key
MODE
or
HOLD
to select T1 or T2.
