axiome axm 960, User Manual

Page: 13 / 47

axm960
User manual Presentation
23/02/11
Page 13
AXIOME
6. First use of the reader
6.1. Installation of the USB drivers
Before using the axm960 for the first time, it is necessary to install the USB drivers. You can find the drivers on the CD-rom deliver with each AXIOME
readers.
The necessary files are located in:
LCDaxmV12.2005\Utilities\Usb 9xx\Driver USB Axiome
When the reader in connected to the PC with the USB cable, a new device will be automatically detected. You just have to follow the procedure give by
your support. If a special file is requested, you can find it in the Driver USB AXIOME as explain before.
Remark: It is necessary to repeat the operation twice before the new device is correctly installed.
6.2. Control switch & LED
The control switch presents 4 distinct functions with corresponding LED colouring.
6.2.1. Starting in read mode
Press the control switch until the LED turns green, then release. An auto-test is carried out. If it is unsuccessful the LED flashes red/green. If the problem
persists, switch to test mode (see below). If the auto-test was successful, the reader is now in read mode and is ready to be piloted by the communication
software.