manualshive.com logo in svg

AXIOMATIC AX141200, User Manual

Share
Download
AXIOMATIC AX141200 User Manual Download Page 15

 

UMAX141200. Wi-Fi to CAN Converter. Version 1 

 

 

 

 

 

Page: 15-44

The home page shows the device information, including the converter part number, serial 
number, and firmware version. It also shows 

Wi-Fi

, 

IP Network

 and 

CAN

 configuration 

parameters including the status of 

CAN ID Range

 and 

CAN ID Mask

 input filters. 

 
You will need to allow the site to run JavaScript (this setting is default in the majority of web 
browsers). If JavaScript is disabled, the website will show a message asking to activate 
JavaScript at the top of the web page, see Figure 8. 
 

 

Figure 8. Enable JavaScript Prompt 

 
The 

IP Network

 configuration parameters are combined into 

Server

 and 

Client

 groups for 

convenience.  
 
The 

IP Network

 and 

CAN

 configuration parameters have tooltips clarifying their meaning, see 

Figure 9. 
 

 

Figure 9. A Tooltip for the “Auto Connect to Remote” Configuration Parameter 

3.2 Changing 

Configuration 

Parameters 

The converter configuration parameters are grouped into the following configuration pages: 

Wi-

Fi Settings

, 

IP Network/CAN Settings

, 

CAN ID Range Filters

 and 

CAN ID Mask Filters

. The 

configuration pages can be reached by clicking on their links on the left side of the website, 
see Figure 10. 
 
Each configuration web page has fields to enter values of the configuration parameters and 
three buttons: 

Save Settings

, 

Discard Settings, 

and 

Set Defaults

, see Figure 10. The 

Wi-Fi 

Settings

 page has the fourth button: 

Reboot Converter

 since the Wi-Fi settings are applied only 

after the converter reboot. 
 

Summary of Contents for AX141200














































Reviews:

No comments

Brands by name

Popular brands

Load more brands