Step 3
Set your level on top of the frame. As you tighten the
screws, the metal frame should push out behind the
wall to create a clamp. This can be helped along by
pushing it out with your fingers. Tighten each of the
screws to clamp the frame to the wall (the screws
should be snug but not forced).
Step 4
If your speaker wire is not already installed in the
wall you will need to run it down inside your wall to
your baseboard and then around the room to your
amplifier or receiver.
Step 5
Insert the speaker wire into the hole in the binding
posts of the Architectural Speaker, keeping the
red and black (positive and negative) connections
consistent. Use the supplied wrench to tighten down
each nut to hold the wires in place.
Step 6
Finally, mount the Architectural Speaker by sliding the
speaker into the wall-mount frame using the middle
indent as a guide. When the speaker contacts the
wall, push in and down to lock it in place.
If you have any further questions or concerns please
contact one of our audio experts.
1-866-244-8796
Speaker Wire
Screw Driver
Level
Wall-Mount
Frame
Wall-Mount
Frame
Wrench
Speaker Wire
Indents
For further information about your product, please see our Manual Index at:
www.axiomaudio.com/manual_index.html
®
AXIOM ARCHITECTURAL SERIES SPEAKERS
Visit
www.axiomaudio.com/manual_index.html
for further information.
