®
Location:
This is by far the most important step before we
even begin the installation.
For the most effective
placement the speakers should be at roughly the
same height as the middle of the TV screen they are
to be used with, one to the left and one to the right of
the screen. Otherwise, a height of
five or six feet from the floor and
in between the studs of the wall
is ideal. Avoid corner locations if
possible. Separate the left and
right speakers by about 5 to 10
feet, or roughly half the listening
distance. Please make sure the
speaker wire has a clear path from
your stereo or A/V receiver to the
placement of your speaker.
The Axiom Architectural Speakers
are designed to be installed in the
common stud wall with drywall
or some similar type wall board
covering. For other types of walls
special installation procedures
will need to be used.
Step 2
Place the wall-mount frame in the wall cutout from
Step 1. The frame is marked “TOP” for proper
orientation of the speaker (models W2 & W3). The W22
frame can be mounted either side up.
Wall Studs
Outline on
the wall
Level
Wall-Mount
Frame
AXIOM ARCHITECTURAL SERIES SPEAKERS
Visit
www.axiomaudio.com/manual_index.html
for further information.
For further information about your product, please see our Manual Index at:
www.axiomaudio.com/manual_index.html
Specifications
Model:
W2
W3
W22
Max Rec. Amp Power:
150 Watts
175 Watts
200 Watts
Min Amp Power:
15 Watts
10 Watts
10 Watts
Re/- 3dB:
70 Hz – 22 kHz
60 Hz – 22 kHz
60 Hz – 22 kHz
Re 3dB/- 9dB:
60 Hz – 22 kHz
50 Hz – 22 kHz
50 Hz – 22 kHz
Impedance:
8 Ohms
8 Ohms
8 Ohms
SPL In Room 1w/1m:
90 dB
91 dB
92 dB
SPL Anechoic 1w/1m:
86 dB
87 dB
88 dB
X-Over:
2.7 kHz
2.2 kHz
3.5 kHz
Tweeter:
Single 1”
Single 1”
Single 1”
Woofer:
Single 5¼”
Single 6½”
Dual 5¼”
On-wall Dimensions HWD mm:
293 x 211 x 91
345 x 244 x 91
508 x 211 x 91
In-wall Dimensions HWD mm:
200 x 79 x 86
244 x 106 x 86
340 x 79 x 86
On-wall Dimensions HWD inches:
11.5 x 8.3 x 3.6
13.6 x 9.6 x 3.6
20 x 8.3 x 3.6
In-wall Dimensions HWD inches:
7.86 x 3.1 x 3.4
9.6 x 4.18 x 3.4
13.37 x 3.1 x 3.4
Weight kg each:
3.83 kg
4.08 kg
5.26 kg
Weight lbs each:
8.45 lbs
9 lbs
11.6 lbs
Step 1
Using the supplied template and a level (not
included) mark an outline of the wall cutout to place
the Architectural Speakers. Be sure to avoid the
wall studs by at least 1.5 inches on each side. Then
carefully cut the selected area using a jigsaw or
drywall saw.
Warning:
Make sure there aren’t any other wires,
pipes, or other fixtures that might be in the wall
before cutting.
