CARDIOID PRESET
The cardioid preset must be used in a sub array of three SW218A. Two box must be oriented towards the audience and one must be turned in the
opposite direc on (typically the box in the centre of the array). The bo om and the top boxes must have the STANDARD PRESET, the box in the
middle must have the CARDIOID PRESET. The audio signal sent to all boxes is the same.
The CARDIOID PRESET has the same response of the STANDARD PRESET, but to obtain the maximum cancella on on the back side of the array it
has the phase inverted and a proper level and delay se ng.
The
fi
gure below shows two typical displacement of the array. The
fi
rst with all the boxes in horizontal posi on for a total height of 1770 mm and
a width of 1215 mm. The second one with all the boxes in ver cal posi on for a total height of 1215 mm and a width of 1770 mm.
NOTES:
When placing the cardioid array keep a distance to walls or other obstacles of at least 80 cm (2.6 ) in order not to a
ff
ect the radia on of the
reversed cabinet.
When placing mul ple cardioid arrays keep a distance between them of at least 80 cm (2.6 ) in order not to maximize the combined radia on
of whole arrays.
80 cm min.
2.7
Ō
min.
80 cm min.
2.7
Ō
min.
80 cm min.
2.7
Ō
min.
stage
wall or other
big ostacle
bass sum direc
Ɵ
on
bass cancella
Ɵ
on direc
Ɵ
on
audience
fl
oor
