Axiom Luna SD9 Series, Installation Manual

Page: 10 / 11

FIG 1. CONNECTION TO IN-LINE POSTS
BRSCS screws required, 4 per post. 5.5mm Ø
fixing holes to be drilled on the outer groove lines
of the Inner Rail. See Fig 1 which illustrates use
with both continuous and non continuous Inner
Rails.
FIG 2. CONNECTION CORNER POSTS
The Inner Rail is mitred over the post, to the
desired angle. BRSCS screws required, 2 per rail end.
5.5mm Ø fixing holes to be drilled on the Inner
Rail centreline. Fig 2 shows a typical arrangement.
FIG 3. CONNECTION OF SLOPING RAILS TO POST
BRSCS screws required, 4 per posts on the
outer groove lines of the Inner Rail. Drill 5.5mm Ø
fixing holes at the correct angle to the rail. Fig 3
shows a typical arrangement.
Insert screws until they are fully inserted. All screws
must be fully inserted/tightened
Luna Installation Manual
FIG. 3
FIG. 1
FIG. 1
FIG. 2(A)
Axiom BRSCS
screws
Axiom BRSCS
screws
Axiom BRSCS
screws
Axiom BRSCS
screws
AFGIR Innerrail
AFGIR
Innerrail
AFGIR Innerrail
AFGIR
Innerrail
AFG post
AFG post
AFG post
AFGEC post