REAR PANEL
INPUT -
Power input for the external ampli
fi
er. The AX2065P does not include a passive crossover for
fi
ltering the signal, but only an internal
protec on that applies a gentle high-pass
fi
ltering and a limita on for excessive power on the HF sec on. The connec ons are the following:
INPUT - LINK
NL4 pin number
internal connec
Ɵ
on
1+
LF+
1-
LF-
2+
HF+
2-
HF-
LINK -
Power output in parallel with the INPUT socket for connec ng the unit to another speaker.
The number of AX2065P cabinets that can be connected in parallel depends on the ampli
fi
er load capacity.
WARNING: In case of using the AX2065P passive module linked with an AX2065A ac
Ɵ
ve module DO NOT LINK ANY OTHER AX2065P.
Useful tools to set up properly a ver
Ɵ
cal array system
This is a list of tools that can be very useful to set properly a ver cal array system.
CABLE TESTER
It is a good prac ce to check all cables before each installa on, because even one faulty cable can compromise heavily the
system performance.
INCLINOMETER WITH LEVER
This tool can be used to verify the ver cal array angle. It can be used at the top or at the bo om of the array In this
case you have to sum all splay angles, so the maximum precision is needed for aiming the ver cal array, par cularly
for long throw applica ons.
LASER DISTANCE METER
This instrument can be useful to measure the height of the ver cal array and to know the distance between FOH-Subs and FOH-Array
for se ng the delay me.
SMAART
or similar acous c measurement system
These are useful to measure delays, phase and response of the system.
