PREDICTION: EASE Focus 2
To aim correctly a complete system we suggests to use always the Aiming Software - EASE Focus 2:
The EASE Focus 2 Aiming Software is a 3D Acoustic Modelling Software that serves for the configuration
and modelling of Line Arrays and conventional speakers close to reality. It only considers the direct
field, created by the complex addition of the sound contributions of the individual loudspeakers or
array components.
The design of EASE Focus is targeted at the end user. It allows the easy and quick prediction of the array
performance in a given venue. The scientific base of EASE Focus stems from EASE, the professional
electro- and room acoustic simulation software developed by AFMG Technologies GmbH. It is based
on the EASE GLL loudspeaker data file required for its use:
AXIOM_AX Series_v2_1.GLL
, please note
that the version must be 2.0 or more. The GLL file contains the data that defines the Line Array with regard to its possible configurations as well
as to its geometrical and acoustical properties.
Download the EASE Focus 2 app from the AXIOM website at http://www.axiomproaudio.com/ clicking on downloads section of the product.
Use the menu option
Edit / Import System Definition File
to import the file
AXIOM_AX Series_v2_1.gll
from the installation Data folder, the
detailed instructions to use the program are located in the menu option
Help / User’s Guide
.
Note: Some windows system can require the
.NET Framework 4
that can be download from microsoft website at http://www.microsoft.com/en-
us/download/default.aspx.
WARNING! CAREFULLY READ THE FOLLOWING INSTRUCTIONS AND CONDITION OF USE:
• This loudspeaker is designed exclusively for Professional audio applications.
The product must be installed by qualified personal only
.
• Proel strongly recommends that this loudspeaker cabinet be suspended taking into consideration all current National, Federal, State and
Local regulations. Please contact the manufacturer for further information.
• Proel do not accept any liability for damage caused to third parties due to improper installation, lack of maintenance, tampering or
improper use of this product, including disregard of acceptable and applicable safety standards.
• During assembly pay attention to the possible risk of crushing. Wear suitable protective clothing. Observe all instructions given on the
rigging components and the loudspeaker cabinets. When chain hoists are in operation ensure that there is nobody directly underneath or
in the vicinity of the load. Do not under any circumstances climb on the array.
AIMING and SUSPENDING INSTRUCTIONS
Fly Bar and accessories
The AX2010 Systems are built to allow the suspension of array with variable shape and dimensions. Thanks to a suspension mechanism designed
to be functional, flexible and safe, each system must be suspended or stacked using the
KPTAX2012P
fly bar. The loudspeakers are linked together
in a column using a series of couplers integrated in the frame of each enclosure. Each system is set up properly both acoustically and mechanically
only using the aiming software.
Coupling system in the front does not require any adjustment: using two
locking pins, each loudspeaker box is fixed to the previous. The slotted bar in
the back is inserted in a U-shaped frame which features a series of numbered
holes. Sliding the slotted bar in the U-shaped frame of the next loudspeaker
and inserting a locking pin in one of the numbered holes, it is possible to
adjust the relative splay angle between two adjacent loudspeakers in the
array column.
KPTAX2012P
fly bar maximum capacity is 700 Kg (1540 lbs) with the 0° angle.
It can support up to 12 AX2010 loudspeakers with a safety factor of 10:1.
Follow the sequence in the figure for fixing the fly bar at the first box. Usually
this is the first step before lifting up the system. Be careful to insert properly
all the locking pins (2)(3) and the shackle (5) in the right holes as specified by
the aiming software.
When lifting the system always proceed gradually step by step,
paying attention to secure the fly bar to the box (and the box to
the other boxes) before pulling up the system: this makes easier to
insert properly the locking pins. Also when the system is released
down, unlock gradually the pins.
During the lifting be very careful to not let the cables enter the
space between one enclosure and the other, as their compression
could cut them.
1
2
2
3
4
1
5
KPTAX2012P FLY BAR ASSEMBLY SEQUENCE
SUSPEND HOLES
SUSPEND HOLE
INDICATOR
REAR BOX
PIN ATTACHMENT
FRONT BOX
PIN ATTACHMENT
FRONT BOX
PIN ATTACHMENT
STRAIGHT SHACKLE 16mm
M10 FOOT FOR
STACKED INSTALLATION
(OPTIONAL)
IDENTIFICATION AND
DATA LABEL
KPTAX2012P FLY BAR AND ACCESSORIES
