PREDICTION: EASE Focus 3
To aim correctly a complete system we suggests to use always the Aiming Software - EASE
Focus 3.
The EASE Focus 3 Aiming Software is a 3D Acoustic Modelling Software that serves for the
configuration and modelling of Line Arrays and conventional speakers close to reality. It only
considers the direct field, created by the complex addition of the sound contributions of the
individual loudspeakers or array components.
The design of EASE Focus is targeted at the end user. It allows the easy and quick prediction
of the array performance in a given venue. The scientific base of EASE Focus stems from
EASE, the professional electro and room acoustic simulation software developed by AFMG
Technologies GmbH. It is based on the EASE GLL loudspeaker data file required for its use:
AXIOM_Column_vX_X
. The GLL file contains the data that defines the Line Array with regard
to its possible configurations as well as to its geometrical and acoustical properties.
Download the EASE Focus 3 app from the AXIOM website at http://www.axiomproaudio.com/ clicking on downloads section of the product.
Use the menu option
Edit / Import System Definition File
to import the file
AXIOM_Column_vX_X
from the installation Data folder, the detailed
instructions to use the program are located in the menu option
Help / User’s Guide
.
Note: Some windows system can require the
.NET Framework 4
that can be download from microsoft website at http://www.microsoft.com/en-
us/download/default.aspx.
WARNING! CAREFULLY READ THE FOLLOWING INSTRUCTIONS AND CONDITION OF USE:
• This loudspeaker is designed exclusively for Professional audio applications.
The product must be installed by qualified personal only
.
• Proel strongly recommends that this loudspeaker cabinet be suspended taking into consideration all current National, Federal, State and
Local regulations. Please contact the manufacturer for further information.
• Proel do not accept any liability for damage caused to third parties due to improper installation, lack of maintenance, tampering or
improper use of this product, including disregard of acceptable and applicable safety standards.
• During assembly pay attention to the possible risk of crushing. Wear suitable protective clothing. Observe all instructions given on the
rigging components and the loudspeaker cabinets. When chain hoists are in operation ensure that there is nobody directly underneath or
in the vicinity of the load. Do not under any circumstances climb on the array.
Pin locking and splay angles set up
The figure below shows how to insert correctly the locking pin and how to set up the splay angle between loudspeakers.
LOCKING PIN INSERTION
press and
insert
SW2100A-AX12C
and
AX12C-AX12C
locking pin
KPTAX12C-AX12C
locking pin
KPTWAX12C-AX12C
locking pin
release
and lock
When connecting two speakers
together or one speaker to an
installation accessory, insert
the pin in this hole first,
also use it to rest the pin when unused.
Use these holes for the splay angle:
0°
as no splay.
2°
as normal splay angle to obtain
a curved vertical array.
4°
as splay angle to aim the first speaker
downward (stacked only).
AX12C SPLAY ANGLE SET UP
Summary of Contents for AX12C
Page 13: ......
