Axiom AX12C, User Manual

Page: 2 / 14

MECHANICAL DRAWING
OPTIONAL ACCESSORIES
COVERAX12C Cover / carry bag for single AX12C/AX12LF KPTFAX12C Floor stand
AXCASE09 Flight case for two AX12C/AX12LF and accessories KPTPOLEAX12C Pole adapter
AXCASE10 Flight case for four AX12C/AX12LF and accessories DHSS10M20 Sub-Speaker ø35mm 1-1.7m Pole with Handle and M20 screw
ESO2500LU025 25 cm SPEAKON linking cable 4x4mm KP210S Sub-Speaker ø35mm 0.7-1.2m Pole with M20 screw
NL4FX Neutrik Speakon® PLUG KPTAX12C Flybar for suspending up to 4 units
KPTWAX12C Wall bracket for up to 2 units PLG716 Straight Shackle 16 mm for Fly bar
KPTFAXC
Foam adapters for stage monitor or frontfill application
see http://www.axiomproaudio.com for detailed description and other available accessories.
SPARE PARTS
NL4MP
Neutrik Speakon® panel socket
95MET300023
AX12C front speaker net colour black
94SPI10100 Locking Pin for AX12C 95MET300024 AX12C rear speaker net colour black
98TDS3WZ22 3.5’’ speaker - 1” VC - 22 ohm 95MET300023WH AX12C front speaker net colour white
95MET300024WH AX12C rear speaker net colour white
116.6 cm
45.9"
(wit
outh rig
ging)
121.2 cm
47.7"
(with rig
ging)
118.5 cm
46.7"
(pin t
o pin dis
tance)
10.7 cm
4.2"
19.3 cm
7.6"
4 x M5
Flat Head
Allen
Screws
IMPORTANT
In case you need to replace
the AX12C bracket, utilize
the 4 screws indicated
in the figure.
In case you decide to remove
the AX12C bracket (because
it is not needed), put back
the screws in the threaded
holes as shown in the figure,
in order to avoid air leakage.