AX-7600
1. Safety instructions
AX-7600 is Class II laser product and accords with EN60825-1 safety standard. Failure to follow the instructions listed
below may cause personal injury.
•
Read and understand all instructions prior to any operation.
•
Do not remove any labels from the tool.
•
Do not operate the tool with the presence of flammable/explosive gases.
•
Do not operate the laser tool around children or allow children to operate the laser tool, failure to do so will injure
children’s eyes.
•
Do not stare into the laser beam.
•
Do not project the laser beam directly into the eyes of others.
•
Do not set up the tool at eye level or operate the tool on or near a reflective surface, as the laser could be projected
into people’s eyes.
•
Do not observe the laser beam by using optical tools such as binoculars and magnifying glass.
•
To avoid burning danger, remember that the reflective objects make the reading lower than their actual temperature.
DANGER
Class II Laser Product
Maximum Power Output< 1mW
Wavelength: 630-660nm
Do not stare into beam!
Avoid direct eye exposure!
This tool emits a laser radiation!
