Product description:
SKT 20-20M = Multituner - QAM twin module
SKT 40-20M = Multituner - QAM quattro module (SKT 40-24M with CI)
SKT 80-20M = Multituner - QAM octo module (SKT 80-22M with CI)
The modules transmodulates DVB-S/S2/T/T2/C/Cx into DVB-T2.
Mounting and Installation:
Before inserting or changing a module, pull the mains plug of the
headend base unit from the socket!
The headend modules can be operated either in a headend base units
(1) or stand-alone with the external power supply unit (2).
The module is supplied with power by DC patch cable (3). While looping
the modules through, a maximum of 3 x SKT 80-2x or 4 x SKT 20/40-2x
can be connected together.
It is imperative to use a power supply unit with sufficient output
power for your application!
At the input the modules have a remote supply voltage for the LNB.
For
receiving DVB-T/T2 or DVB-C the LNB power has to be switched
off before connecting a antenna cabel to one of the HF inputs!
You will find this setting in the configuration in phase 1.
Display elements and connectors
1 2/4/8 × LED indicators MPEG data stream modulator
Error (red) = Fill level >95%
OK (green) = Fill level OK
2 4/8 × HF input
3 1/2 × RJ-45 Ethernet port
4 4/8 × HF input LED indicator:
Orange = MPEG data stream present,
Off = no MPEG data stream
5 Equipotential bonding connection
6 1/2 × HF output
7 Fan
8 2 × DC input/output
Notes
4
Detailed operation instructions of the modules
are available at www.axing.com
4
Observe the operation instructions of the used
headend base unit!
4
Observe the operation instructions of the used
power supply unit!
4
If the device is mounted in the headend base
unit, the connection to the equipotential
bonding has to be done via the headend base
unit.
4
If the module is mounted external a headend
base unit the module and the power supply
unit must be connected to the equipotential
bonding according to EN 60728-11. Use the
equipotential bonding connection at the
device.
Common Interfaces
Note:
Each CAM corresponds and
gets access only to according tuner.
CAM 1 - tuner 1
CAM 2 - tuner 2
CAM 3 - tuner 3
CAM 4 - tuner 4
CAM1
CAM2
CAM3
CAM4
CAM1
left
CAM1
right
Configuration:
The device is configured via the graphical user interface of the
integrated web interface. To access the user interface, you need a
standard PC/laptop with a network interface and the actual
version of the installed web browser. To connect the network
interface of the module to the computer, you need a commercially
available network cable.
The SKT 80-2x contains two separate units. Each unit has its own
web interface and its own static IP address.
Accessing the configuration interface:
Default IP address of the SKT 20-2x:
192.168.0.145
Default IP address of the SKT 40-2x:
192.168.0.145
Default IP address of the SKT 80-2x, left side:
192.168.0.145
Default IP address of the SKT 80-2x, right side:
192.168.0.146
Subnet mask:
255.255.255.0
4
Change the IP address of your PC/laptop, e.g. to 192.168.0.11.
4
Now enter the IP address 192.168.0.145 in the web browser.
The configuration screen is password-protected:
4
Enter the default password Ramsen8262.
4
Click the "Enter password" button and then the "Open page"
button.
4
This will open the start page.
4
After the first log-in, the password should be changed.
Scope of delivery:
1 × Headend module
1 × DC connection cable
1 × Quick start guide
1
3
2
3
