2016-06-30 | © AXING AG Switzerland | Technical changes, design modifications, errors and misprints are subject to change
17
3.6.3.
Changing the password
The default password should be changed right after commissioning the module. The default password can be
changed in the menu MAINTENANCE > SET NEW PASSWORD.
The default password is:
Ramsen8262
.
Any new password must be 8-10 characters (letters and/or digits) long.
After changing the password, the module must be rebooted.
After this the user must log in with the new password.
3.6.4.
Rebooting
Clicking on the REBOOT button reboots the module. After rebooting, the password must be entered again.
Note:
If SAT signals are temporarily unavailable (e.g. due to snow), the module will reboot every 10 minutes.
This ensures that all configured programmes will be available once the signal becomes available again.
3.6.5.
Erasing service data
In the section ERASE SERVICE DATA you can erase the settings from phase 2. The transponder data must be
read again for tuners 1-4 by executing a scan.
The module is also set to remux mode.
All manuals and user guides at all-guides.com
