2018-10-05 | Technical improvements, changes in design, printing- and other errors expected.
11
3.2.3.
Advanced RF settings
If necessary, enter the fine adjustment of the output channel in 10 kHz steps in the
Frequency offset
field.
The
Output enable
option can be used to switch off the output signal.
The
Single Tone
option determines whether, for example, in the event of a faulty or missing input
signal, a single carrier is to be output as an output signal.
Click
Safe Settings
to save your settings.
3.3.
Video Source
On the main menu, click
Video
.
The settings for the video source can be made for each of the four input ports.
In the
Port
selection field, select video source
1
to
4
.
For each video source, set the
Output Coding
(H.264 or MPEG2).
For each video source, set the
Encoder Rate
to
Auto
or select a value between
4 ... 14 Mbps
.
If you select
Auto
, make sure that the output data rate is not exceeded.
The
Resolution
and
Current Rate
fields indicate the resolution and bit rate of the connected video
source.
Click
Safe Settings
to save your settings.
