manualshive.com logo in svg

Axia xNode, Installation & User Manual, Page: 5 / 64

Share
Download
Axia xNode Installation & User Manual Download Page 5

N

ot

ic

es

 a

nd

 C

au

tio

ns

 •

 v

© 2016 Axia Audio - Rev 2.0

xNode Manual

© 2014-2016 TLS Corp. Published by Axia Audio/TLS Corp. All rights reserved.

TRADEMARKS

Axia Audio and the Axia and xNode logos are trademarks of TLS Corp. All other trademarks are the property of 

their respective holders.

NOTICE

All versions, claims of compatibility, trademarks, etc. of hardware and software products not made by Axia Audio 

which are mentioned in this manual or accompanying material are informational only. Axia makes no endorsement 

of any particular product for any purpose, nor claims any responsibility for operation or accuracy. We reserve the 
right to make improvements or changes in the products described in this manual which may affect the product 
specifications, or to revise the manual without notice.

WARRANTY

This product is covered by a five year limited warranty, the full text of which is included in this manual.

UPDATES

The operation of Fusion is determined largely by software. We routinely release new versions to add features and fix 

bugs. Check the Axia Audio web site for the latest. We encourage you to sign-up for the email notification service 
offered on the site.

FEEDBACK

We welcome feedback on any aspect of Fusion, or this manual. In the past, many good ideas from users have made 

their way into software revisions or new products. Please contact us with your comments.

SERVICE

You must contact Axia before returning any equipment for factory service. We will need your unit’s serial number, 

located on the back of the unit. Axia will issue a return authorization number, which must be written on the exterior 
of your shipping container. Please do not include cables or accessories unless specifically requested by the Technical 
Support Engineer. Be sure to adequately insure your shipment for its replacement value. Packages without proper 
authorization may be refused. US customers, please contact Axia Technical Support at +1-216-622-0247. All other 
customers should contact local representative to make arrangements for service.

Summary of Contents for xNode

































































Reviews:

No comments