17
B. Removing the glasses
1. Remove the top (shutter) by screwing down bolts on both sides. (See figure 2).
2. Screw down other 6 bolts in the opposite top on both sides of door. (See figure 2).
3. Draw out and remove the glass 1. (See figure 3).
4. Remove the two screws and brackets.
5. Draw out and remove glass 2. (See figure 3).
6. Clean the top (shutter) with stainless steel cleaning water with suitable brand products.
C. Installing the oven door
1. Install the glasses back in the correct surface and order.
2. Install the top (shutter) back by screwing the bolts up.
3. Set the hinges into their respective holes on both sides, and swing the oven door downwards.
The step of hinges will be revealed if the oven door is in right position. Lock the latch.
4. Close the oven door.
Figure 2
The gap
Card slot
The gap
Larger version
Larger version
Glass 2
Glass 1
Figure 3
Braket
