AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE
– [email protected] – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 -
Capital : 500 000,00 €
File : quick start user guide YOU reader
Version : V1.0
4/5
2
Introduction
The YOU reader is a contactless reader that can read NFC/RFID cards @13.56MHz. It can be used
in keyboard emulation or in PC/SC. This configuration can be requested when ordering the reader
from AXEM Technology.
2.1
First time use
Connect the YOU reader to one of the USB ports on your computer.
Wait 10 to 20 seconds until the operating system turns on the reader driver and activates the reader.
The first time you connect the reader, it may take a few seconds to activate or download drivers.
This is normal.
After that, the coupler device will be activated within a few seconds.
Watch the LEDs on the device. As soon as the cyan light enters a "periodic on/off" sequence, the
device is ready!
2.2
Understanding the LEDs and the beeper
LED and Bips
Description
Blue LED
The device is ready and waiting for a contactless card.
Unique Bip + green LED
A contactless card is present and available for operation.
Repeted bips
The communication between the device and the card is not reliable. Place
the card closer to the device. Install the device in a different location.
Red LED, flashing
Problem (hardware error or overheating).
Yellow LED, flashing
The PC has not yet activated the device.