AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE – [email protected] – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : 20190517_S-8800_&M-2900_User_guide.docx S-
8800 M 2900
Version : V1.0
25/27
Operations as below:
Users can use the serial port commander to read and write GPIO in their own applications.
3.6.4
Setting Buzzer Status
Reader’s working status is provided to users through the Buzzer. Three ways to set the buzzer:
1. Quite: turn off the buzzer
2. Beep after an inventory round: set it as beep each time when tag inventory is taken.
3. Beep after a tag is identified: set it as beep each time when reader identifies a tag. ( It will reduce
the efficiency of multi-tag identification)
This setting will be stored even when the power is cut off.
Operation as below:
Note: There is a short beep when turn on the reader (reader self-test to check the connection to PC),
which is not controlled by this setting.
