AXEM Technology
11, rue Auguste Perret - ZAC Europarc - 94042 Créteil Cedex France
Tél. : +33 (0)1 41 94 11 85 - Fax. : +33 (0)1 49 56 91 52 - [email protected] - www.axemtec.com
Page 5/12
AT288N
User guide
AT288N UI guide
Page 5
AT288N UI guide
AT288N UI guide
Corp.
Atid Co., Ltd.
Document Ui guide Writer
Won-Tak Choi
Date
2016-05-25
Version
v0.3
1
Description for Main Function
Protocol
It is designated to select neither ISO/IEC 18000-6C or ISO/IEC 18000-6B, but ISO/IEC 18000-
6B is not available at present. It will be supporting in the near future.
Remote control
AT288N can be used by both Bluetooth and USB. For the detailed information, Bluetooth
Protocol can be set up among SPP, HID and BLE
(To be supported)
. Also USB protocol can
be set up by either VCP or HID.
Bluetooth
BTH SPP
The connection can be available using Serial Profile Protocol and Data to be
transmitted will be uploaded to Serial Port (COM Port) of upper level device. Upper
level device should produce the additional program for utilizing the transmitted data.
BTH HID
The connection can be available using Human Interface Device and Data to be
transmitted will be uploaded on the cursor as like Keyboard typing. The caution
should be needed in using the device since the difference between the data read
by actual device and data on the cursor can be occurred in accordance with keyboard
language setting of upper level device
BTH BLE
The connection can be available using Bluetooth low energy and possible to use in
IOS. The reading distance is shorter than existing Bluetooth, but effectivity is better
than existing one.
USB
USB VCP