AXEM Technology
11, rue Auguste Perret - ZAC Europarc - 94042 Créteil Cedex France
Tél. : +33 (0)1 41 94 11 85 - Fax. : +33 (0)1 49 56 91 52 - [email protected] - www.axemtec.com
Page 11/12
AT288N
User guide
AT288N UI guide
Page 11
AT288N UI guide
AT288N UI guide
Corp.
Atid Co., Ltd.
Document Ui guide Writer
Won-Tak Choi
Date
2016-05-25
Version
v0.3
C Key
There are two functions for C key. For AT288 users, please note the key functions
differently in AT288N since AT288N only supports 6C.
Short Press
When C Key is pressed, different Inventory Mode can be selected.
One Tag mode-> Multi Tag mode-> Unique Tag mode
Long Press
Long press would enable or disable the Beep Mode.
RF Power Control Left Key
There are two functions for RF Power Control Left Key.
Short Press
RF power can be adjusted. 1dBm is decreased per press. The minimum RF power
that can be set is 11dBm.
Long Press
Remote Protocol can be selected by long press. If COM PORT setting is USB, USB
protocols are selected. If COM PORT setting is BT, BT protocols are selected. It will
take 3.5 seconds to apply the mode changes.
For USB protocol, USB_VCP
USB HID
USB_VCP
BT Protocol, BT_SPP
BT_HID
BT_BLE
BT_SPP
RF Power Control Right Key
There are two functions for RF Power Control Left Key.
Short Press
RF power can be adjusted. 1dBm is increased per press. The maximum RF power
that can be set is 30dBm.