AXELL D-CSR 3302 US VHF REPEATER
PRODUCT DESCRIPTION AND US
ER’S MANUAL
© Axell Wireless Ltd
Doc PN 0034B-UM Rev. 2.1
29
6.3
CSR Channel Configuration
The initial setup procedure consists of defining the required VHF channels. Up to eight
channels can be defined, where each channel is defined according to the following
parameters:
UL center frequency and DL center frequency
Type of channel according to usage (High Selectivity or Low Delay)
Attenuation
Power level
To configure channel RF parameters
1. Access the
Home
screen (displayed by default).
A
partial
image showing only the channel definitions area is illustrated below.
2. Define the
Downlink
and the
Uplink
parameters for each required channel:
Set the
Centre
frequency.
Set the type of
Filter
to
Low Delay
or
High
Selectivity
according to site
requirements.
Set the
Power Level
according to the following options:
Max
– maximum power available according to the number of active channels.
Max-1 to Max-9
– from 1 to 9 dBm less than the maximum power according
to the number of active channels.
OFF
– no power is transmitted on corresponding UL or DL channel.
NOTE: Be sure to disable inactive channels by setting the Power Level to OFF.
Downlink channel
definitions
Uplink channel
definitions
