13
Setup instruction
Clean & replace the filter
The filter is already assembled before delivery from factory. But the filter should be cleaned or replaced
after a certain time use. It should be operated by Technical people or ask for advice by local distributor.The
method is mentioned below.
1.
Hold the filter down to the board position with force to back side can remove filters.
2.
Take the filter out of the filter frame. Tap the filter with certain object for cleaning. If the filter is
really dirty.Dip it into natural detergent solution to wash and flush with water.
3.
Put the cleaned or newly replaced filter slightly into its proper position in filter frame. Then cover
the filter frame gently.
Note : Filter can be used for one year normally, if damage occurs, the filter should be changed immediately.
How to clean the filter :
Remove the filter frame from the unit, take out the dirty filter and clean it (it can be cleaned by water).
When it is dry, please install it as per directive.
Important notes
1.
The range of the remote control is five meters.
2.
Batteries must be inserted into the remote control which must be pointed direct at the unit, using
the front portion to activate.
3.
Do not obstruct the air outlet when operating the unit.
4.
Use indoor only.
5.
Should it be necessary to move the unit after the water has been added, roll gently to the required
position and activate the bracket the castors.
6.
The unit is safe and reliable if the power socket is earthed.
7.
Clean the filter every 20-30 days of operation for optimum performance by removing screw at back
of heater and gently rinsing filter in clean water.
8.
Always ensure that there is water in the unit when in use for cooling.
9.
If the supply cord is damaged,please contact your dealer for help.
Summary of Contents for RAF
Page 10: ...10 Structure...
