12
Operating instructions
Remote controller
❖
How to install batteries
1.
Open the back cover, and take off the isolating film on the batteries
2.
Put the batteries inside the slot, with anode and cathode in right directions ;
3.
Put on the back cover.
Notices :
❖
The anode and cathode of the batteries must be corresponding to the signs of
“+”
and
“
-
”
on the
remote control ;
❖
Do not use new battery cells together with run-down cells;
❖
For long time no use, take out the batteries ;
❖
To prevent environmental pollution, take out the used batteries and dispose safely and
appropriately.
How to use the remote control panel :
1.
WIND
button: press this button can change wind bearing 120°
2.
TIMER
button: one press increase 0.5 hour, total 7.5 hours, the four LED indicators always indicate
the timer remained. If the set timer is reached, the machine automatically shut off.
3.
SPEED
button: Three wind flow level; “HIGH”, “MIDDLE”, “LOW” with three LED indicator.
4.
MODE
button:Press this button to select Normal, Natural, Sleep mode.
5.
COOL
button: press this button to cooling.
6.
ANION
button: press this button, then the Anion function is turn on.
7.
POWER
Button: can run the machine and power the machine
Note : If the remote control is not going to be used for a long time, please take out the batteries to avoid
corrosion of parts for leakage of electrolyte from batteries
Summary of Contents for RAF
Page 10: ...10 Structure...
