SAFETY WARNINGS
ENG
Pag. 14
Do not change the voltage setting or replace the mains fuse without first turning the
unit off and unplugging the mains cord.
This apparatus must be EARTHED !
To avoid risk of fire use the correct value fuse, as indicated on the label stuck on the
right side of the unit.
Make sure the AC main voltage corresponds to that indicated in the technical
specifications.
This apparatus uses a single pole mains switch and does therefore not separate the
unit completely from the mains power. To completely separate from mains power (f.i.
in the event of danger) unplug mains power cord. As the MAINS plug as the
disconnect device, the disconnect device shall remain readily operable.