SAFETY WARNINGS
ENG
Pag. 13
8 SAFETY
WARNINGS
The installation and servicing instructions in this manual are for use by qualified personnel only.
- Read All Instructions. All safety and operating instructions must be read before operating the product.
They also must be retained for future reference, as it contains a number of useful hints for determining
the best combination of equipment settings for Yr particular application.
- Heed All Warnings. All warnings on the product and those listed in the operating instructions must be
adhered to.
- Heat. This product must be situated away from any heat sources such as radiators or other products
(including power amplifiers or transmitters) that produce heat.
- Power Sources. This product must be operated from the type of power source indicated on the marking
label and in the installation instructions. If you are not sure of the type of power supplied to your facility,
consult your local power company. Make sure the AC main voltage corresponds to that indicated in the
technical specifications. If a different voltage (ex. 110/115 VAC) is available, open the equipment closure
and set the voltage switch on the main supply circuit, located behind the AC socket
- Power Cord Protection. Power supply cords must be routed so that they are not likely to be walked on
nor pinched by items placed upon or against them. Pay particular attention to the cords at AC wall plugs
and convenience receptacles, and at the point where the cord plugs into the product
- Clean only with dry cloth
-
Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
- Lightning. For added protection for this product during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the AC wall outlet and the audio connections. This will
prevent damage to the product due to lightning and power line surges
- Installation. Configuration and installation should only be carried out by a competent installation engineer
- Cabling. Using high quality wires, well protected. Make sure the cable integrity.
- Equipment design. This manual images could differ a bit from the equipment actual design
This symbol alerts you to the presence of dangerous voltage inside the closure –
voltage which may be sufficient to constitute a risk of shock. Do not perform any
servicing other than that contained in the operating instructions. Refer all servicing
to qualified personnel
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.