FM VERSION DESCRIPTION
ENG
Page 18
11.2 REAR PANEL VIEW (FM VERSION)
1
ON/OFF main switch
, the led inside switchs on/off accordingly. If it is off while the switch is ON, please
check the supplied AC cord and the fuse.
AC outlet
: IEC power cord receptacle. AC voltage change-over switch is located inside the box, closed to
the AC transformer
2
Digital input
*. It features two connectors: XLR female for coaxial connections and tos-link for optical
connections
3
RS232 Serial Ports
: optoisolated serial ports for connection to PCs or satellite receivers.
4
Sync-in
(
not connected)
5
Sync-out
: S
ynchronism output. It provides 19KHz tone at 5Vpp to lock external equipment (for instance
RDS coders)
6
Out
It features Stereo Composite signal or Stereo Composite RDS (with or without signals
injected from Aux 1 and 2 mixed into). The output is set for a 75 Ohm load
7
Multipurpose Aux In (for external RDS, SCA, etc..)
:
the injected signal is adjusted by the related
trimmer (near to the Bnc), mixed to the Falcon 15 internally generated signal and output by the main Out
connector. Factory preset: 0 dB gain
8
Multipurpose Aux In (for external RDS, SCA, etc..)
: the injected signal is adjusted by the related
trimmer (near to the Bnc), mixed to the Falcon 15 internally generated signal and output by the main Out
connector. Factory preset: 0 dB gain
9
Analog Input
: bi-channel audio input electronically balanced on XLR female. The input level is set via the
menu
10
Digital Data Port
: SubD 15-pin female Interface. It provides 3 optoinsulated “trigger” inputs (for RDS M/S
and TA service enabling and for splitting mode control)
*
available as an option (DG-IN option – ref to Chapter 2)
Summary of Contents for Falcon 15
Page 2: ......