Installation
4
Installation Guide - Models 95
2.2 - INSTALLATION
For safety reasons and to prevent component damage do not apply power to
the AXEL thin client before connecting or disconnecting any cables. Do not plug
in the AXEL thin client power cord until all other connectors have been plugged
in.
Make sure the AXEL thin client and monitor power switches are in the OFF (0)
position before connecting cables to the rear panel.
2.2.1
– Monitors, mouse and keyboard
For safety reasons and to prevent component damage please connect all
cables before applying the power cord.
a) The Monitor(s)
Two video ports are available on the rear panel:
- VGA or SVGA (SVGA)
- Disp+, dual mode (
).
Single or dual monitor is supported - any combination of VGA and Displayport.
DisplayPort can easily be converted to DVI or HDMI.
Note 1:
only the DisplayPort/VGA adaptor should be an 'active' adaptor.
Displayport to DVI or HDMI should be 'passive'.