Rev 1.0
9-1
SCALE (Display Scale
setting page)
Value on EEPROM reset=1
1.Decide scale with
or
or
key(0.0001~9.9999)
2.Press
key enter data and return normal display
RPM(scale = 0.0001~9.9999), LINE-SPEED(rotation diameter =
0.0001~9.9999M)
Step
Parameter mark description
Parameter mark Operation manual
10
Normal display
Press
/A-ADJkey about 3 sec,into AZERO adjustment page
10-1
AZERO(Analog Output
Zero Adjustment page)
Value on EEPROM reset=0
1.Adjustment analog output zero with
or
or
key(
±
9999)
2.Press
key enter data and into ASPAN adjustment page
10-2
ASPAN(Analog Output
Span Adjustment page)
Value on EEPROM reset=0
1.Adjustment analog output span with
or
or
key(
±
9999)
2.Press
key enter data and return normal display
Appendix Error Mark description
Error Mark
Analyze & Description
1
Input over range error
detect
Input signal over range(0~50KHz)
2
Display over range error
detect
Input signal over display range(99999)
3
EEPROM error detect
1.External interference when EEPROM read/write
2.EEPROM write over 100 million times(guarantee 10 years)
Please power reset,if still display E-00,doing following
step:
1.
E-00 & No alternate display for inquire reset EEPROM
2.
Decide Yes with or key,press key return normal
display
3.
EEPROM was reset,Please follow step 1~10 set again
