Rev.1.0
6
AOP(Analog output setting
group)
1.Press
key decide AOP setting group , press
key into ANLO
setting page
6-1
ANLO(Analog Output Zero-
According to Display)
Default = 0
1. Decide ANLO with
or
key (-19999~99999)
2. Press
key enter data and into ANHI setting page
6-2
ANHI(Analog Output Span-
According to Display )
Default = 99999
1. Decide ANHI with
or
key (-19999~99999)
2. Press
key enter data and into AZERO setting page
6-3
AZERO(Analog Output
Zero Adjust)
Default = 0
1. Adjustment analog output zero with
or
key (
±
5999)
2. Press
key enter data and into ASPAN adjustment page
6-4
ASPAN(Analog Output
Span Adjust)
Default = 0
1. Adjustment analog output span with
or
key (
±
5999)
2. Press
key enter data and return AOP setting group
7
DOP(Communication setting
group)
1.Press
key decide DOP setting group, press
key into ADDR
setting page
7-1
ADDR(Communication –Addr
ess )
Default = 0
1.Decide address with
or
key(0~255)
2.Press
key enter data and into BAUD setting page
Note: When setting value is greater then 255,it will be return to zero.
7-2
BAUD(Communication Baud
Rate)
Default = 19200
1. Decide baud rate with
key (38400,19200,9600,4800,2400)
2. Press
key enter data and into PARI setting page
7-3
PARI(Communication Parity
Check)
Default = n.8.2.
1.Decide Parity Check with
key(n.8.2.,n.8.1.,even,odd)
2.Press
key enter data and
return DOP setting group
Step Parameter mark description Parameter mark
Operation manual
8
Normal display
Press
/ALARM key about 3 sec, into AL1 setting page
8-1
AL1 (Alarm 1)
Default = 0
1. Decide alarm value 1 with
or
key (0~99999)
2. Press
key enter data and into AL2 setting page
8-2
AL2 (Alarm 2)
Default = 0
1. Decide alarm value 2 with
or
key (0~99999)
2. Press
key enter data and return normal display
Step Parameter mark description Parameter mark
Operation manual
9
Normal display
Press
/SCALE key about 3 sec, into SCALE setting page
9-1
SCALE (Scale)
Default = 1.0000
1. Decide scale with
or
key (0.0001~9.9999)
2. Press
key enter data and return normal display
Appendix Error Mark Description
Error Mark
Analyze & Description
1
EEPROM error detect
1.External interference when EEPROM read/write
2.EEPROM write over 100000 times(guarantee 10 years)
Please power reset, if still display E-00, doing following step:
1.
E-00 & No display for inquire reset EEPROM
2.
Decide Yes with
key, press
key return normal display
3
.
EEPROM has reset, Please follow step 1~9 setting again
